# changelog

author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-14
  ----------------------------------

  v6.04 build56:
  -------------

  Defect/Enhancement: Defect
  Problem: LUN QoS API returns "Not Supported"
  Solution: Fixed QoS value read issue in BSG path
  Introduced: v6.04 build21
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61, ISP2031
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  Enablement Kit Version: 6.0.0.0-15
  ----------------------------------

  v6.04 build57:
  -------------

  Defect/Enhancement: Defect
  Problem: Delay seen in Application bringup on some inbox drivers
  Solution: Do not perform retries for newer features if driver returns
  	  not supported error
  Introduced: v6.04 build28
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-16
  ----------------------------------

  v6.04 build63:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Allow NVMe specific APIs for newer ISPs
  Introduced: v6.04 build63
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271,
  	    ISP2261, ISP2871, ISP2971, ISP2A61
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build62:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added ISP FW and MPI FW lockdown bits
  Introduced: v6.04 build62
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build61:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Provide lockdown mode error codes to apps
  Introduced: v6.04 build61
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build60:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added adapter firmware lockdown support
  Introduced: v6.04 build60
  Impact: HW: ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build59:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added EP2989 support
  Introduced: v6.04 build59
  Impact: HW: EP2989
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build58:
  -------------
  Defect/Enhancement: Defect
  Problem: HBA Parameters read fails for newer adapters for inbox drivers
  Solution: Read active HBA Parameters region set from flash
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-17
  ----------------------------------

  v6.04 build75:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Mailbox passthru support
  Introduced: v6.04 build75
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build74:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added NVRAM parameters for SCMR Profile support
  Introduced: v6.04 build74
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build73:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added SCMR Profile support
  Introduced: v6.04 build73
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build72:
  -------------
  Defect/Enhancement: Defect
  Problem: Random apps crash seen when large number of vports present
  Solution: Validate vport memory pointers before accessing it
  Introduced: v6.04 build24
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build71:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added EP2881 and EP2981 support
  Introduced: v6.04 build71
  Impact: HW: EP2881, EP2981
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build70:
  -------------
  Defect/Enhancement: Defect
  Problem: Flash update failure on UOS on ARM (aarch64)
  Solution: Corrected BSG pointers for UOS on ARM
  Introduced: v6.04 build24
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build69:
  -------------
  Defect/Enhancement: Defect
  Problem: Invalid LUN size display for small sized (In MBs) and large sized
  	 (in TBs) NVMe LUNs
  Solution: Use correct read capacity format to get LUN size of NVMe LUNs
  Introduced: v6.04 build52
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build68:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps delay seen with NVMe targets
  Solution: Cache common NVMe target data to avoid multiple calls to NVMe targets
  Introduced: v6.04 build52
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build67:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Session shutdown state macro support
  Introduced: v6.04 build67
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build66:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps crash seen with HBA_RemoveCallback SNIA API
  Solution: Avoid double free of memory freed in HBA_RemoveCallback SNIA API
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build65:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps delay seen with disabled/isolated port
  Solution: Avoid apps retries for disabled/isolated port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build64:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added USCM Phase 2 support
  Introduced: v6.04 build64
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Defect
  Problem: Apps crash seen with disabled/isolated port
  Solution: Fixed apps crash with disabled/isolated port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-18
  ----------------------------------

  v6.04 build81:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added NVRAM parameters for UEFI boot support
  Introduced: v6.04 build81
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build80:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added additional USCM statistics info
  Introduced: v6.04 build80
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build79:
  -------------
  Defect/Enhancement: Defect
  Problem: Port reset seen on all ports of the adapter after HBA parameter update
  Solution: Allowed reset only in HBA parameter modified port
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build78:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps crash seen with DPort test with newer firmware
  Solution: Increase response buffer size to read extra data provided by FW
  Introduced: v6.04 build24
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289 ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build77:
  -------------
  Defect/Enhancement: Defect
  Problem: NPIV port seen as physical port on newer OSes
  Solution: Corrected host number list
  Introduced: v6.04 build24
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build76:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added FC-GS-8 based speed definitions
  Introduced: v6.04 build76
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.0-19
  ----------------------------------

  v6.05 build7:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Use 32bit buffer size of SFP FW update
  Introduced: v6.05 build7
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build6:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added 64G FC SFP FW update support
  Introduced: v6.05 build6
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Remote Port API support
  Introduced: v6.05 build5
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build4:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Secure Port V2 API support
  Introduced: v6.05 build4
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build3:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v6.05 build3
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build2:
  -------------
  Defect/Enhancement: Defect
  Problem: Feature API confilct seen FOAPI
  Solution: Removed conflicting duplicate feature APIs
  Introduced: v6.05 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.05 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v6.05 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build90:
  -------------
  Defect/Enhancement: Defect
  Problem: Incorrect NVMe portID seen when multiple targets present
  Solution: Provide valid PortIDs for NVMe targets
  Introduced: v6.04 build85
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build89:
  -------------
  Defect/Enhancement: Defect
  Problem: Incorrect secure target fields seen
  Solution: Provide valid info for secure targets
  Introduced: v6.04 build54
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build88:
  -------------
  Defect/Enhancement: Defect
  Problem: NVRAM dat file update failure on 8G adapter
  Solution: Fixed dat file update on 8G adapter
  Introduced: v6.04 build2
  Impact: HW: ISP2532
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build87:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Uncorrectable FEC error count support in USCM stats 
  Introduced: v6.04 build87
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build86:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added I/O Throttling support
  Introduced: v6.04 build86
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build85:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added PortID support for NVMe targets
  Introduced: v6.04 build85
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289, ISP2071, ISP2271, ISP2261
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build84:
  -------------
  Defect/Enhancement: Defect
  Problem: Boot code valid bit is set for all boot codes
  Solution: Set boot code valid bit only when valid boot code is found
  Introduced: v6.04 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build83:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Virtual Lane support
  Introduced: v6.04 build83
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v6.04 build82:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added new NVRAM parameters
  Introduced: v6.04 build82
  Impact: HW: ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-1
  ----------------------------------

  v7.00 build1:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Use OS provided libsysfs library
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added Klocwork static analysis fixes
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-2
  ----------------------------------

  v7.00 build3:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps issue seen with static library
  Solution: Fixed static library issue
  Introduced: v7.00 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build2:
  -------------
  Defect/Enhancement: Defect
  Problem: Apps runtime failure on RHEL 9 due to libsysfs function
  Solution: Removed dependency of libsysfs function
  Introduced: v7.00 build1
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-3
  ----------------------------------

  v7.00 build6:
  -------------
  Defect/Enhancement: Defect
  Problem: checksec.sh reported security property issues
  Solution: Fixed checksec.sh reported security property issues
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build5:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added driver maintenamce mode support for FW load error
  Introduced: v7.00 build5
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build4:
  -------------
  Defect/Enhancement: Defect
  Problem: Debug symbols present in library binary
  Solution: Removed debug symbols from library binary
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Marvell Semiconductor Inc.
changelog:
  Enablement Kit Version: 6.0.0.1-4
  ----------------------------------

  v7.00 build11:
  -------------
  Defect/Enhancement: Defect
  Problem: Incorrect USCM congestion severity value seen with USCM phase 2 support
  Solution: Read USCM congestion severity value in USCM phase 2 support
  Introduced: v6.04 build64
  Impact: HW: ISP2071, ISP2261, ISP2081, ISP2281, ISP2089, ISP2289
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build10:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Updated SNIA HBA API speed definitions
  Introduced: v7.00 build10
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build9:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Updated SFP read enhancements macros
  Introduced: v7.00 build9
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build8:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Added SFP read enhancements
  Introduced: v7.00 build8
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC

  v7.00 build7:
  -------------
  Defect/Enhancement: Defect
  Problem: Invalid error seen when multiple SG's failed at driver level
  Solution: Added new error code for multiple SG failure
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: Kumar Rahul<Linux_SWdeliverables@external.groups.hp.com> 3.2-5
changelog:
  - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards


author: Shreya Roy Chowdhury<Linux_SWdeliverables@external.groups.hp.com> 3.2-6
changelog:
  - Corrected Link state display information for Qlogic Adapters
  - Added MSA G3 support in Scsi_info.h


author: QLogic Corp <support@qlogic.com> 10.02.14.00-k1-3
changelog:
  - 10.02.14.00-k1 AG 05/21/2025
  -

  - 10.02.14.00.a4-k1 AG 02/27/2025
  [FCD-4186] : Device discovery fails on continuous reboot (Hitachi)

  Resolution : In a fabric topo when there is mismatch in state of login between
  driver and FW, query FW again and proceed with login
  Scope : 27xx/28xx Adapters

  [FCD-XXX] : Make functions local to a file static

  Resolution : Make functions local to a file static
  Scope : 27xx, 28xx series Adapters

  [FCD-XXX] : Remove unused function

  Resolution : Function qla25xx_set_purex is unused - remove it
  Scope : All adapters

  [FCD-4729] : Compilation errors with Sles15sp6

  Resolution : Fix compilation errors on Sles15 SP6
  Scope : Series Adapters

  [FCD-4536] : Compilation errors on RHEL10

  Resolution : RHEL 10 has rebased to the latest kernel
  resulting in several build issues. Fix them
  and ensure that it builds on older kernels as well.
  Scope : Series Adapters

  [FCD-4676] : Add support for RH 9.6 (compilation)

  Resolution : Fix compilation errors on RH 9.6
  Scope : Series Adapters

  [FCD-XXX] : Update README to reflect the supported distros

  Resolution : Update README to reflect the supported distros
  Scope : All Adapters

  Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
  Change-Id: Ic4af035fd48a3137923c7d3590be4271b0a7fd32

  commit e22ea0921e20bcf93db0fae2b8dd579005686908
  Author: Anil Gurumurthy <agurumurthy@marvell.com>
  Date: Fri Jan 10 11:06:14 2025 +0530

  qla2xxx: Update driver version to 10.02.13.03-k1.

  - 10.02.13.03-k1 AG 01/10/2025
  [FCD-4627] : HPSD5.10-BFS RHEL9.5 system crash on Nimble-HF40 failover test.

  Resolution : Check for sp being valid, before freeing associated memory
  Scope : All


  - 10.02.13.02-k1 MR 01/07/2025
  [FCD-4657] : Fix SCSI INQ issue for supporting T10 DIF.

  Resolution : Replace sp completion with qpair completion call..
  Scope : 28XX

  - 10.02.13.01-k1 MR 01/02/2025
  [FCD-1040] : Call scsi done and nvme done with good completion without lock.

  Resolution : Done changes to move scsi done and nvme done without lock.

  Scope : 27xx and above


  - 10.02.13.00-k1 AG 10/22/2024
  -

  - 10.02.13.00.a3-k1 SD 10/09/2024
  [FCD-XXX] : Crash seen during load/unload test in a loop

  Resolution : Delay module unload when there is a fabric scan going on
  Scope : All adapters

  [FCD-4193] : SCSI device never recovers after RSCN

  Resolution : Remove tape specific checks which prevented recovery
  Scope : All adapters


  - 10.02.12.01-k1 MR 05/29/2024
  [FCD-3465] : Server got crashed while running port toggle test.

  Resolution : During vport_delete send async_logout explicitly.
  Scope : 28XX

  - 10.02.12.00-k1 SD 05/20/2024
  -

  - 10.02.12.00.a5-k1 SD 05/07/2024
  [FCD-3970] : Crash while performing NPIV+FW reset test

  Resolution : Call sp->done inside lock
  Scope : All adapters

  [FCD-3947] : Supported speed displayed incorrectly for VPorts

  Resolution : The fc_function_template for vports did not have the
  supported_speeds field.
  Scope : All adapters

  - 10.02.12.00.a4-k1 SD 04/25/2024
  [FCD-3970] : Crash while performing NPIV+FW reset test

  Resolution : Call sp->done inside lock
  Scope : All adapters

  [FCD-3947] : Supported speed displayed incorrectly for VPorts

  Resolution : The fc_function_template for vports did not have the
  supported_speeds field.
  Scope : All adapters


  - 10.02.12.00.a3-k1 SD 03/15/2024
  [FCD-3797] : Driver installed using tarball failed to build initrd
  image after executing "./extras/build.sh initrd" command.

  Resolution : SLES15SP6 stop supporting mkinitrd command.
  Scope : ALL

  [FCD-xxx] : SFP cache on legacy adapter

  Scope : all

  - 10.02.12.00.a2-k1 SK 02/08/2024
  [FCD-3797] : Driver installed using tarball failed to build initrd
  image after executing "./extras/build.sh initrd" command.

  Resolution : SLES15SP6 stop supporting mkinitrd command.
  Scope : ALL

  [FCD-xxx] : Fix NVME + NPIV connect issue

  Resolution : Initialize irq offset
  Scope : ALL

  - 10.02.12.00.a1-k1 QT 01/09/2024
  scsi: qla2xxx: Drop redundant pci_enable_pcie_error_reporting()
  Resolution : Fix RHEL 9.4 compile issue
  Scope : ALL

  [FCD-3515] : API support for SFP data cache
  Scope : 27xx, 28xx

  [FCD-xxx] : Fix SLES15.6 compile issue
  Resolution : Remove stale fields
  Scope : ALL

  [FCD-3634] : Remove check req_sg_cnt should be equal to rsp_sg_cnt.
  Resolution : Firmware supports multiple sg_cnt for request and
  response for CT commands, so remove the redundant check.
  Scope : All Adapters

  [FCD-717] : Move FCE Trace buffer allocation to user control
  Resolution : Modify existing DFS knob to allow user to enable|disable this feature.
  Scope : Any

  [FCD-xxx] : Remove del_work work from qla_schedule_sess_for_deletion.
  Resolution : Remove del_work work from qla_schedule_sess_for_deletion.
  Scope : All

  [FCD-xxx] : Additional target mode code cleanup.
  Resolution : Additional target mode code cleanup.
  Scope : All

  [FCD-xxx] : Update copyright information.
  Resolution : Update copyright information.
  Scope : All

  [FCD-xxx] : Remove target code from qla_target files.
  Resolution : Remove target code from qla_target files.
  Scope : All

  [FCD-xxx] : Remove target mode code from initiator specific files.
  Resolution : Remove target mode code from initiator specific files.
  Scope : All

  [FCD-xxx] : Move common code to initiator specific files.
  Resolution : Move common code to initiator specific files.
  Scope : All

  [FCD-3751] : Fix use after free on unload
  Resolution : Remove duplicate signals on freeing dpc_thread
  Scope : ALL

  [FCD-3515] : Caching SFP data
  Scope : 27xx, 28xx

  [FCD-xxx] : Exec FW with delay
  Resolution : Add delay before command retry
  Scope : 28xx

  [FCD-xxx] : fix abort in bsg timeout
  Resolution : Wait for bsg to return before abort exit
  Scope : ALL

  [FCD-xxx] : Use QP lock to search for bsg.
  Resolution : use correct lock to protect search
  Scope : ALL

  [FCD-xxx] : Remove SQ in queuecommand
  Resolution : Remove duplicate code.
  Scope : ALL

  [FCD-xxx] : Reduce fabric scan duplicate code.
  Resolution : Consolidate routines that handle GPNFT & GNNFT.
  Scope : ALL

  [FCP-743] : Remove ql2xstay_attach_on_load_failure
  Resolution : Remove driver parameter used as part of feature test.
  Scope : 27xx, 28xx


  - 10.02.11.00-k1 NJ 10/25/2023
  [FCD-xxx] : Remove PCI ID 0x2971
  Resolution : Remove PCI ID 0x2971
  Scope :

  [FCD-3661] : Remove 8031 from deprecate and unmaintained list.
  Resolution : Remove 8031 from deprecate and unmaintained list.
  Scope : 8031

  [FCD-3571] : Unable to resume FW dump collection
  Resolution : send notification to udev
  Scope : 27xx, 28xx

  [FCD-3631] : Convert Port disable state to maintenance mode
  Resolution : Rename state and turn flag indicator
  Scope : 27xx + 28xx

  - 10.02.11.00.a8-k1 NJ 10/13/2023
  [FCD-3632] : Remove support for FCoE device ids.
  Resolution : Remove FCoE ids from pci table.
  Scope : 8xxx

  [FCD-3624] : Fix optrom version displayed in FDMI
  Resolution : Populate EFI version
  Scope : Series Adapters

  [FCD-3632] : Remove CNA reference from README.
  Resolution : Remove CNA reference from README.
  Scope : 8xxx

  - 10.02.11.00.a7-k1 NJ 09/22/2023

  [FCD-3195] : Fix flash read failure
  Resolution : Check return code for each flash read.
  Scope : Series Adapters

  [FCD-3571] : System flood by fw dumps
  Resolution : udev script to pause fw dump collection
  Scope : Any

  [FCD-3566] : Limit FW dump improvement to 27xx + 28xx
  Resolution : Add filter for 27xx + 28xx adapters
  Scope : 27xx+

  [FCD-3497] : Return ENOBUFS if sg_cnt is more than one for ELS cmds.
  Resolution : This error is because FW support single sg element for
  ELS Pass-through IOCB (0x53h). This particular error
  code will help API and Apps to display appropriate
  message to the user.
  Scope : All Adapters

  [FCD-3510] : RHEL & SLES OOB driver request: deprecate L8/Hilda HW
  Resolution : Added a frame work to display the message based on device and OS.
  Scope : L8 and L16 (Hilda and CNA)

  [FCD-3269] : Init Control Block is dereferenced incorrectly
  Resolution : Correctly dereference ICB
  Scope : 20xx

  [FCD-3421] : Add Support to collect fw_dump on system crash or panic.
  Resolution : Add Support to collect fw_dump on system crash or panic
  Scope : 27xx, 28xx

  - 10.02.11.00.a6-k1 MR 09/08/2023

  [FCD-XXX] : Modify error code handling for sfp fw upgrade mbx.
  Resolution : Modify error code handling for sfp fw upgrade mbx.
  Scope : 28xx

  [FCD-XXX] : Block sysfs resets and fw_dump during sfp fw upgrade
  Resolution : Block sysfs resets and fw_dump during sfp fw upgrade
  Scope : 28xx

  [FCP-743] : Block sysfs access during maintenance mode
  Resolution : Add check for maintenance mode.
  Scope : Any

  [FCD-3506] : Fix double free of dsd_list during driver load.
  Resolution : add pointer check before access
  Scope : Any

  - 10.02.11.00.a5-k1 MR 08/18/2023

  [RH BZ 2039422] : NVMe-FC kernel crash during reload driver test
  Resolution : validate nvme_local_port correctly
  Scope : Any

  [FCD-XXX] : Fix for potential Null pointer dereferenced
  Resolution : Check before dereferencing pointer
  Scope : Any

  [FCP-743] : Enable driver attach to bad HW
  Resolution : turn on ql2xstay_attach_on_load_failure option
  Scope : 27xx, 28xx

  - 10.02.11.00.a4-k1 MR 08/11/2023

  [FCD-xxx] : Update README file for zio information
  Resolution : Update readme file with zio information
  Scope : Any

  [FCD-3415] : Std-DIF is not working with HPe K1 driver
  Resolution : Reset the protect bit in the INQ response
  only when pDIF is enabled and negotiated.
  Scope : 26xx/27xx/28xx

  - 10.02.11.00.a3-k1 AG 08/03/2023

  [FCP-743] : Allow only selective BSG requests in maintenance mode
  Resolution : Allow certain BSG to go through during maintenance mode
  Scope : Any

  [FCP-743] : FW dump improvement
  Resolution : Improve data capture
  Scope : 27XX, 28XX

  [FCD-3252] : Unable to act on RSCN for port online.
  Resolution : Clear RSCN flag only when driver is acting on the notification
  Scope : Any

  [FCD-xxx] : 32 Bytes CDB
  Resolution : Use Type 6 IOCB for CDB bigger than 16Bytes
  Scope : Any

  Unit Test : i) force IO to use Type6 only for over the weekend run.
  ii) force error path(s) to make sure no crash.

  [FCD-xxx] : Move resource to allow code reuse.
  Resolution : relocate dsd_list to qpair
  Scope : Any

  - 10.02.11.00.a2-k1 AG 07/27/2023

  [FCD-3411] : CS_DMA Error observed while running DIF IO
  Resolution : While running DIF enabled IO, a CS_DMA error was observed.
  A FW dump is needed to better debug this. So take a FW dump
  on encountering this.
  Scope : 27xx/288 series of adapters

  [FCD-3406] : Modifiy default zio threshold value.
  Resolution : Modifiy default zio threshold value.
  Scope : 27xx/28xx Series Adapters

  [FCD-3314] : Delay IO Abort on PCI error
  Resolution : On detection of PCI error, allow IO's to wind down.
  Scope : Any

  [FCD-3314] : Fix system crash due to bad pointer access
  Resolution : Check SRB type before access.
  Scope : 27xx+

  - 10.02.11.00.a1-k1 AG 07/14/2023

  - FCP-749: qla2xxx: Add support for build for RH 9.3 and RH 8.9 distro
  Resolution : Build on RH 9.3 was failing owing to change of definition
  of fc_host_fpin_rcv and removal of DID_TARGET_FAILURE. Fix part of it
  by updating to latest upstream code.
  Scope : 27xx/28xx series of adapters


  - FCD-3302 : During unload Error detected messages is seen.

  Resolution : Change the wording of the message as its not an error.
  Scope : Series Adapters

  - FCD-3293 : Initiator sever getting crashed after LOGO.

  Resolution : Fix double free of fcport
  Scope : Any

  - Revert "scsi: qla2xxx: Change default ZIO threshold."

  This reverts commit 8812bcc1b7a25494ec8755ff3b61412a9993ff5b.
  The ZIO threshold now is 64.

  - FCD-xxx : Fix unreachable code

  Resolution : Remove dead code
  Scope : 28xx+

  - FCD-3232 : Potential risk of double free pointer detected in Coverity scan by ran by Citrix

  Resolution : NULL the pointer after first free.
  Scope : All

  - 10.02.10.00-k1 SK 06/14/2023
  Non-alpha build

  - 10.02.10.00.a2-k1 BH 05/12/2023

  - FCD-3140: qla2xxx: Fix command flush on cable pull.
  Changes: Add wait for commands to return.

  - FCD-XXX: qla2xxx: NVME|FCP prefer flag not being honored.
  Changes: Reread prefer flag on chip reset

  - FCD-XXX: qla2xxx: Update readme file

  - 10.02.10.00.a1-k1 BH 05/02/2023
  - FCD-XXX: qla2xxx: Update Copyright
  Changes: Update Copyright for Marvell.

  - FCD-XXX: qla2xxx: Update manufacturer detail
  Changes: Update manufacturer detail to "Marvell"

  - FCD-3140: qla2xxx: Host crash during StressAndHostPortReset test
  Changes: Remove unused nvme_ls_waitq wait queue.

  - FCD-XXX: qla2xxx: [RH-BZ 2167274]: Wait for io return on terminate rport.
  Changes: dd wait to terminate_rport_io

  - 10.02.09.00.a11-k1 BH 03/27/2023
  - FCD-XXX: qla2xxx: Add link down + logo rx stat counts
  Changes: Add counters to track link down and Logo receive.

  - 10.02.09.00.a10-k1 BH 03/17/2023
  - FCD-XXX: qla2xxx: Support for update SFP firmware of ACCELINK
  Changes: [New Feature] Support for update SFP FW of ACCELINK WTD 64G

  - FCD-717: qla2xxx: Split FCE|EFT trace control
  Changes: Split buffer alloc and enable of feature into individual step.

  - BZ-2093878: qla2xxx: perform lockless command completion in abort path
  Changes: Perform lockless command completion in abort path

  - 10.02.09.00.a9-k1 BH 03/06/2023
  - FCD-2390: qla2xxx: Fix N2N stuck connection.
  Changes: Clear the blocking flag.

  - FCD-2496: qla2xxx: Prevent command send on chip reset
  Changes: Check for chip reset before sending IOCB.

  - FCD-2035: qla2xxx: Fix mem access after free.
  Changes: Remove access of memory

  - FCD-2720: qla2xxx: Move cmd_to_req_q latency counter before processing response.
  - FCD-XXX: qla2xxx: Update readme file for current program

  - 10.02.09.00.a8-k1 BH 02/27/2023
  - FCD-2585: qla2xxx: Remove unsupported ql2xenabledif option.
  Changes: Removed unsupported ql2xenabledif=1 option and validate the user input.

  - FCD-2305: qla2xxx: Error code did not return to upper layer
  Changes: Preserve error code from TMF and return it to upper layer.

  - FCD-2035: qla2xxx: fix inconsistent TMF timeout.
  Changes: Allow TMF error to return to upper layer without session tear down.

  - FCD-2035: qla2xxx: Fix TMF leak through.
  Changes: Check for chip reset or session change before sending Task management.

  - 10.02.09.00.a7-k1 BH 02/17/2023
  - FCD-2858: qla2xxx: USCM: Check for vp_idx before setting EDC and RDF set flags.
  Changes: Add check for vp_idx before setting EDC and RDF set flags when processing RIDA.

  Revert patch:
  - FCD-2858: qla2xxx: USCM: Remove EDC and RDF set flags on Report ID Acquisition.

  - 10.02.09.00.a6-k1 BH 02/13/2023
  - FCD-2750: qla2xxx: IO's are failing on Standard DIF enabled 3PAR LUN
  Changes: Revert an offending patch and work on an issue with upstream.

  - 10.02.09.00.a5-k1 BH 02/06/2023
  - FCD-2858: qla2xxx: USCM: Remove EDC and RDF set flags on Report ID Acquisition
  Changes: Remove EDC and RDF set flags on Report ID Acquisition.

  - FCD-2879: qla2xxx: Compilation errors on SLES15SP5 Beta3-202301
  Changes: Write generic code to find tag of scsi cmnd

  - FCD-2846: qla2xxx: Correct bsg_reply size in bsg interface
  Changes: Fix the bsg_job->reply_len with size of "struct fc_bsg_reply"

  - FCD-XXXX: qla2xxx: KW: unreachable code
  Changes: Remove the invariant expression in the condition

  - FCD-XXXX: qla2xxx: KW: unreachable code
  Changes: Remove the expression flogi_acc_pld_remaining == 0

  - FCD-XXXX: qla2xxx: Changes of logs level for SFP temperature monitoring

  - 10.02.09.00.a4-k1 BH 01/29/2023
  - FCD-2308: qla2xxx: Add bsg call to read port information
  Changes: Add bsg interface to allow app to read remote port information.

  - FCD-XXX: qla2xxx: KW-97439: unreachable code
  Changes: Return void if return value is not needed

  - FCD-XXX: qla2xxx: Add logs for SFP temperature monitoring
  Changes: Add debug log for Temperature Alert (8070h) Asynchronous Event

  - 10.02.09.00.a3-k1 BH 01/19/2023
  - FCD-XXX: qla2xxx: Add support of RHEL9.2
  - FCD-XXX: qla2xxx: Add support of RHEL8.8
  - FCD-XXX: qla2xxx: Add support of SLES15 SP5
  - FCD-2800: qla2xxx: Add support of OpenEuler-22.03

  - 10.02.09.00.a2-k1 BH 01/10/2023
  - FCD-XXX: qla2xxx: kw: unreachable code, SRB type is 0 just before latency counter incremented.
  Changes: SRB type is 0 just before latency counter incremented.

  - FCD-XXX: qla2xxx: kw: reset current_topology much later
  Changes: Reset current_topology much later on detecting

  - FCD-XXX: qla2xxx: kw: unreachable code, CS_COMPLETE is 0 and its already checked.
  Changes: Remove unreachable

  - FCD-XXX: qla2xxx: kw: Checking for port_state always yields zero
  Changes: Instead of bitwise AND check for port_state directly

  - FCD-1569: qla2xxx: Fix fw resource tracking
  Changes: Use global counter

  - FCD-XXX: qla2xxx: [ER-144639]: Flush mailbox commands on chip reset
  Changes: Use lock to prevent race condition.

  - FCD-2735: qla2xxx: USCM-VL: NVRAM VL disabled logins with extend FLOGI (VL enabled)
  Changes: Reset the spl. features control block flag to avoid logging in with ER_RDY.

  - FCD-XXX: qla2xxx: klockwork: Fix buffer over flow
  Changes: Use correct buffer size.

  - FCD-XXX: qla2xxx: EDIF: kw: remove unnecessary bit field
  - FCD-2563: qla2xxx: Turn off noisy message log.
  - FCD-XXX: qla2xxx: kw: remove dead code in qla24xx_config_rings

  - 10.02.09.00.a1-k1 BH 01/10/2023
  - FCD-717: qla2xxx: allow FW dump extraction if load fail
  Changes: Add knob to force driver to stay attached to the fail adapter.

  - FCD-717: qla2xxx: Initialize FW buffer size with seed value
  Changes: Initialize FW Buffer size with seed value

  - FCD-XXX: qla2xxx: klockwork: Remove QLA_COMMAND_ERROR check in qla2x00_execute_fw.
  Changes: Remove the unnecessary QLA_COMMAND_ERROR check

  - FCD-2390: qla2xxx: Fix session hang in gnl
  Changes: Clear this flag to prevent blockage.

  - FCD-2390: qla2xxx: Fix erroneous link up failure
  Changes: Set fw_started flag early to prevent interrupts being dropped

  - FCD-2496: qla2xxx: Fix command flush during TMF
  Changes: Wait for commands flush before closing TMF

  - FCD-2035: qla2xxx: Limit TMF to 8 per function
  Changes: Limit TMF to 8 per function

  - FCD-XXX: qla2xxx: Add NVMe Disconnect support.
  Changes: Add support for NVMe Disconnect feature.

  - FCD-XXX: qla2xxx: Modify qla27xx_copy_fpin_pkt to support PURLS IOCB.
  Changes: Modified qla27xx_copy_fpin_pkt to support both PUREX and PURLS IOCBs.

  - FCD-717: qla2xxx: Adjust iocb resource on qpair create
  Changes: Add call to readjust iocb + exchange limit.

  - FCD-2390: qla2xxx: Fix deletion race condition
  Changes: Move check field behind lock

  - FCD-XXX: qla2xxx: klockwork: Pointer checked for NULL at linx x will be dereferenced at linx x+y.
  Changes: Remove the unnecessary Null check. The pointer will likely be valid.

  - FCD-XXX: qla2xxx: Observed call trace in smp_processor_id() with debug kernel
  Changes: Use raw_smp_processor_id API

  - FCD-2275: qla2xxx: USCM: Cleanup code related to IOPS based throttling
  Changes: IOPS and BW based throttling is not used. Remove those code.

  - FCD-2273: qla2xxx: USCM: Code cleanup w.r.t module params (ql2x_scmr_flow_ctl_tgt, ql2x_scmr_flow_ctl_host)
  Changes: Remove the redundant module parameters

  - FCD-2408: qla2xxx: USCM: Driver doesn't honor the adapter port Restore Default Settings
  Changes: Update the nvram values to the host as well as fcport

  - FCD-2363: qla2xxx: USCM: Slow Queue usage changes
  Changes: Use Slow queue only under specific scenarios

  - FCD-XXX: qla2xxx: Don't increment interface err cnt in SS_RESIDUAL_UNDER case.
  Changes: Don't increment the counter for under-run.

  - FCD-2291: qla2xxx: Erroneous link down.
  Changes: Allow adapter reset to complete before discovery

  - FCD-2035: qla2xxx: Fix hang in task management
  Changes: Bail out of TMF on error

  - FCD-XXX: qla2xxx: Reduce memory usage during low IO.
  Changes: Free the extra buffers as traffic is reduced

  - FCD-2212: qla2xxx: USCM: Observed call trace during the rmmod qla2xxx module
  Changes: Free srb when throttle down I/O in NVME path

  - FCD-XXX: qla2xxx: USCM: Debug log message improvement
  Changes: Log target WWPN for peer congestion

  - FCD-2164: qla2xxx: Fix stall session after app start
  Changes: Use session delete to avoid the accidental clearing of scan_flag

  - FCD-2185: qla2xxx: USCM: Peer congestion throttling functionality doesn't honor the ISP reset/port toggle
  Changes: Clear the fcport throttling state on an ISP reset

  - FCD-2194: qla2xxx: USCM: VL - Mailbox cmd failure during port toggle
  Changes: Check fcport state before invoking the mailbox

  - FCD-XXX: qla2xxx: USCM: VL - Enhance BW throttle to account for perf. drop while using VL
  Changes: Set throughput baseline on 1st FPIN

  - FCD-2096: qla2xxx: USCM: VL - PUN not incremented on PCN FPIN
  Changes: Fix parsing the fpin when multiple descriptors are present

  - FCD-XXX: qla2xxx: USCM: VL, Cache priority values from FLOGI_ACC
  Changes: Use priority values cached from FLOGI_ACC, when there is no PUN

  - FCD-XXX: qla2xxx: USCM: Limit throttling down based on throughput
  Changes: Limit throttling down based on throughput

  - FCD-XXX: qla2xxx: Fix for KW-97392
  Changes :Validate rport before dereferencing

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..15
  Changes: Correct the index of array

  - FCD-XXX: qla2xxx: Remove dead code - flagged by klocwork
  - FCD-847: qla2xxx: fixup: Fix exchange over subscription.
  - FCD-2434: qla2xxx: Fix crash when IO abort times out
  - FCD-XXX: qla2xxx: Rearrange scm rx path handling code.

  - 10.02.08.01-k1 BH 09/28/2022
  - FCD-2392: Fix initrd image creation failure in OpenEuler, Kylin and UOS
  Changes: Add support for creating initrd image on openEuler, Kylin and UOS

  - 10.02.08.00-k1 BH 09/16/2022
  - FCD-XXX: qla2xxx: Don't increment interface err cnt in SS_RESIDUAL_UNDER case.
  Changes: Residual under-run is not an interface error, hence no need to increment that count.

  - FCD-2291: qla2xxx: Fix erroneous link down.
  Changes: Allow adapter reset to complete before any scan can start.

  - FCD-2035: qla2xxx: Fix hang in task management
  Changes: Add additional error check at various point

  - FCD-XXX: qla2xxx: Reduce memory usage during low IO.
  Changes: Free the extra buffers as traffic is reduced.

  - 10.02.08.00.a7-k1 BH 08/22/2022
  - FCD-2212: qla2xxx: USCM: Observed call trace during the rmmod qla2xxx module
  Changes: Free srb when throttle down I/O in NVME path.

  - FCD-2164: qla2xxx: USCM: Fix stall session after app start
  Changes: Prevent accidental clearing of flag that blocks re-login

  - FCD-2185: qla2xxx: USCM: Peer congestion throttling functionality doesn't honor the ISP reset/port toggle
  Changes: Clear the fcport throttling state on an ISP reset.

  - FCD-2194: qla2xxx: USCM: VL - Mailbox cmd failure during port toggle
  Changes: Heck fcport state before invoking mailbox

  - FCDXXX: qla2xxx: USCM: Debug log message improvement

  - 10.02.08.00.a6-k1 BH 08/09/2022
  - FCDXXX: qla2xxx: USCM: VL - Enhance BW throttle to account for perf. drop while using VL
  Changes: if VL switchreduces the throughput below 50%, we would not throttle any further.

  - FCD-2096: qla2xxx: USCM: VL - PUN not incremented on PCN FPIN
  Changes: Fix the FPIN parsing to take into account multiple descriptors.

  - FCDXXX: qla2xxx: USCM: VL, Cache priority values from FLOGI_ACC
  Changes: Use priority values cached from FLOGI_ACC, when there is no PUN

  - FCDXXX: qla2xxx: USCM:Limit throttling down based on throughput
  Changes: Limit throttling down based on throughput

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..10

  - 10.02.08.00.a5-k1 BH 07/29/2022
  - FCD-XXX: qla2xxx: klocwork: Possible Null Pointer Dereference
  Changes: Validate rport before dereferencing

  - FCD-XXX: qla2xxx: klocwork: Array 'port_dstate_str' of size 10 may use index value(s) 10..15
  Changes: Correct the index of array

  - FCD-XXX: qla2xxx: USCM: Fix mqueuecommand return code during throttle down request.

  - FCD-XXX: qla2xxx: Revert klockwork: Fix buffer overrun

  - FCD-2035: qla2xxx: Fix task mgmt cmd fail with status 30h
  - FCD-2035: qla2xxx: Fix Task Mgmt Cmd fail due to unavailable resource
  Changes: Limit TM commands to 8 per target.

  - 10.02.08.00.a4-k1 BH 07/23/2022
  - FCD-847: qla2xxx: Fix exchange over subscription.
  Changes: check for exchange availability before command submission

  - FCD-XXX: qla2xxx: Remove unintended flag clearing
  Changes: Remove unintended flag clearing.

  - FCD-2035: qla2xxx: Fix task mgmt cmd fail with status 30h
  Changes: Add wait for completion of Marker!

  - FCD-XXX: Fix performance dip due to lock contention
  Changes: Save the allocated memory for reuse and avoid the lock

  - FCDXXX: qla2xxx: USCM: Do not send EDC and RDF for NPIV ports
  Changes: Disable sending USCM ELS for vports

  - FCDXXX: qla2xxx: USCM: VL: Do not set target speed to 1G for slow lane
  Changes: Do not set the target speed while changing lanes.

  - FCD-2012: qla2xxx: Throttling up messages seen when profile is changed
  Changes: Set the new profile for each fcport (along with the host).

  - FCD-XXX: qla2xxx: USCM: VL - Clean up FLOGI_ACC parsing
  Changes: structure that could be used to parse the FLOGI_ACC by using offsets

  - FCD-1990: qla2xxx: Fix nvram load config error
  Changes: Remove re-definition of port flags while enabling virtual lane support

  - FCD-XXX: qla2xxx: USCM:VL, I/O does not move back to the normal lane
  Changes: Check if I/O throttling is being done, before deciding to move the normal lane.

  - FCD-XXX: qla2xxx: Fix stall login
  Changes: Reset session state to allow relogin logic to re-drive the connection.

  - FCD-847: qla2xxx: Fix exchange over subscription for mgt cmd.
  Changes: would check for exchange availability before command submission.

  - FCD-847: qla2xxx: Fix exchange over subscription.
  Changes: would check for exchange availability before command submission.

  - FCD-XXX: qla2xxx: relocate/rename vp map.
  - FCD-XXX: qla2xxx: Klocwork: Fix for Unexpected type of a scan function parameter

  - 10.02.08.00.a3-k1 BH 07/01/2022
  - FCD-1818: qla2xxx: Fix call trace in debug kernel due to missing spinlock init
  Changes: Fix the call trace by initializing trace lock.

  - FCD-1923: qla2xxx: USCM: VL - After disabling VL via CLI, status shows "Non-operational"
  Changes: Return VL status appropropriately

  - FCD-1922: qla2xxx: Fix discovery issues in FC-AL topology
  Changes: Checks FC loop map when Get ID list returns no device

  - FCD-1831: qla2xxx: Fix link failure in NIPV environment.
  Changes: Remove NPIV host from directly being able to chip reset.

  - FCD-XXX: qla2xxx: Fix DMA-API call trace on NVME LS requests with debug kernel
  Changes: Remove DMA mapping from the driver

  - FCD-XXX: qla2xxx: Fix KASAN use-after-free warning in qla24xx_sp_unmap
  Changes: Remove stale fcport access in qla2x00_rel_sp

  - FCD-XXX: qla2xxx: Fix KASAN out-of-bounds warning in qla_update_sp
  Changes: Size for memcpy was corrected to use the right length.

  - FCD-XXX: qla2xxx: Fix imbalance vha->vref_count
  Chnages: Add an extra ref count for the task management paths.

  - FCD-XXX: qla2xxx: Tweak Latency measurement
  Changes: Move the time read further ahead to the start of queuecommand and
  later to the point where it is just before scsi_done.

  - FCD-XXX: qla2xxx: klockwork: Silent superfluous warning.
  Changes: Remove superfluous Null check.

  - FCD-XXX: qla2xxx: klockwork: Fix buffer overrun
  Changes: Replace structure name to allow proper size calculation

  - FCD-XXX: qla2xxx: Remove dead code (GNN ID).
  Changes: Remove stale/unused code.

  - FCD-XXX: qla2xxx: Remove dead code (GPNID).
  Changes: Remove stale/unused code.

  - FCD-XXX: qla2xxx: Remove dead code.
  Changes: Removing drport field and FCPORT_UPDATE_NEEDED, and EDIF_TICK_NEEDED signals

  - FCD-XXX: qla2xxx: Do not select slow queue if USCM is enabled
  Changes: Do not select slow queue whilie initializing cpu map

  - FCD-XXX: Select HW queue depending on Tx CPU
  Changes: Select qpair which is in correlation with Tx CPU

  - FCD-XXX: qla2xxx: Add support for displaying I/O throttle information
  Changes: Display the driver I/O throttle information along with VL information

  - FCD-XXX: qla2xxx: USCM: Throttle only R/W commands for NVME
  Changes: Throttle only read/write IOs.

  - Bring back following reverted changes:
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.


  - 10.02.08.00.a2-k1 BH 06/19/2022
  - FCD-XXX: qla2xxx: klockwork - Check valid rport returned by fc_bsg_to_rport
  Changes: Check valid rport returned by fc_bsg_to_rport

  - FCD-XXX: qla2xxx: klockwork - Check for a valid fcport pointer
  Changes: Add a check for a valid fcport pointer at the time of exit

  - FCD-XXX: qla2xxx: klockwork - Move fcport NULL check to avoid dereference
  Changes: Move the fcport NULL check to avoid the dereference.

  - FCD-1883: qla2xxx: USCM: Adapter shows "RDF Complete" when Link is down
  Changes: Reset the flag, so that when USCM is negotiated, the CLI shows the correct status

  - FCD-1846: qla2xxx: USCM: A log message while clearing stats
  Changes: Add a log message while clearing USCM stats

  - FCD-XXX: qla2xxx: USCM: VL-Reset FC device virtual lane priority to normal on a port flap
  Changes: Reset the virtual lane to normal on a port flap, ISP reset

  - FCD-XXX: qla2xxx: USCM: VL-Set target congestion before switching lanes
  Changes: Set the target state before the lane switch.

  - FCD-1752: qla2xxx: USCM: VL-Sysfs does not show Virtual Lane as enabled
  Changes: extended flogi_acc can also be parsed correctly.

  - FCD-1652: qla2xxx: Check if port is online before sending ELS
  Changes: Check if port is online before sending ELS

  - FCD-XXX: scsi: qla2xxx: Synchronize rport dev_loss_tmo setting

  - 10.02.08.00.a1-k1 BH 05/27/2022
  - FCD-XXX: qla2xxx: USCM: Virtual Lane, Fix PUN handling
  Changes: Have a default priority range for each lane and ensure that the range is programmed correctly

  - FCD-XXX: qla2xxx: USCM: Support for Virtual Lanes
  Changes: Enable Virtual Lane support for Cisco switch

  - 10.02.07.00-k1 BH 05/27/2022
  - Non-alpha build

  - 10.02.07.00.a19-k1 BH 05/21/2022
  - FCD-XXX : qla2xxx: USCM: Throttling is not honored for NVMe
  Changes: Enable NVMe READ/WRITE commands to be throttled

  - FCD-XXX: qla2xxx: USCM: Add counters to track directional throttling
  Changes: Add sysfs counters to have stats displayed for busy status returns.

  - FCD-1801: qla2xxx: USCM: CP reads go to zero while doing directional throttling
  Changes: Take into account the directional queue depth while returning a busy status to the stack.

  - FCD-1809: qla2xxx: USCM: Restoring USCM Profile to default result in driver

  - FCD-1798: qla2xxx: USCM: Profiles are not honored for peer congestion
  Chnages: Apply the profile to each target (fcport) when the profile is changed.

  Reverting the following changes:
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.

  - 10.02.07.00.a18-k1 BH 05/12/2022
  - FCD-1484: qla2xxx: Manufacturer details should be "Marvell Semiconductor, Inc."
  Changes: Update Manufacturer details to indicate Marvell Semiconductors

  - FCD-XXX: qla2xxx: USCM: Throttle only read and write commands
  Changes: Throttle only read and write commands.

  - FCD-XXX: qla2xxx: USCM: Do not clear throttle for Clear Cong FPIN.
  Changes: Do not clear throttle when Clear Congestion FPIN is received.

  - FCD-XXX: qla2xxx: USCM: Change default profile to Monitor
  Changes: Set the default throttle profile as Monitor.

  - FCD-XXX: qla2xxx: Fix few issues reported by klocwork tool

  - 10.02.07.00.a17-k1 BH 05/06/2022
  - FCD-1522: qla2xxx: USCM: Throughput drops to zero in Monitor mode
  Changes: Restore qdepth based on monitor mode

  - FCD-1315: qla2xxx: Fix erroneous mailbox timeout after pci error inject.
  Changes: Clear wait for MB interrupt flag to prevent stale MB completion arriving

  - FCD-1424: Remove verbose IO debug messages
  Changes: Remove the IOCB debug messages for every IO

  - FCD-XXX: Support for NVMe parameters in Auxiliary Image Status
  Changes: Added new structure member, bit define and image status check.

  - 10.02.07.00.a16-k1 BH 04/08/2022
  - FCD-XXX: qla2xxx: qla2xxx: Add srb tracing
  Changes: Add a separate driver internal trace to capture srb related info.

  - FCD-XXX: qla2xxx: Add driver console messages tracing
  Changes: Logs are captured by default in an internal trace buffer depends on setting

  - FCD-XXX: qla2xxx: Add a generic tracing framework
  Changes: A rotating number of messages are captured in a trace structure

  - FCD-XXX: qla2xxx: Add debugfs create/delete helpers
  Changes: Define a few helpful macros for creating debugfs files.

  - FCD-1221: qla2xxx: USCM: Switch does not send FPINs after a EDC re-negotiation
  Changes: Send Link Service Request Information wih the EDC response, along with the other descriptors.

  - 10.02.07.00.a15-k1 BH 03/25/2022
  - FCD-1249: qla2xxx: edif: Fix dropped IKE message.
  Changes: Fixes IKE message being dropped due to error in
  processing Purex IOCB and Continuation IOCBs.

  - FCD-1457: qla2xxx: Zero undefined mailbox IN registers
  Changes: Set zero to unuse register's value while requesting a new MB command.

  - FCD-1425: qla2xxx: USCM: Seconds since last event showing incorrect value
  Changes: Calculate delta time correctly

  - FCD-1287: qla2xxx: Fix incorrect display of max frame size.
  Changes: Save off the field of interest into separate location and convert into words.

  - FCD-XXX: qla2xxx: Fix memory leak when reading tgt_port_database debugfs file
  - FCD-XXX: qla2xxx: USCM: Do not reset SCM stats on a link bounce/ISP reset

  - 10.02.07.00.a14-k1 BH 03/14/2022
  - FCD-XXX: qla2xxx: Fix losing FCP-2 targets on long port disable with IOs
  Changes: Fix this by accepting RSCN when the device is not online.

  - FCD-XXX: qla2xxx: Fix losing target when it reappears during delete
  Changes: Fix the issue by adding state checks before proceeding.

  - FCD-XXX: qla2xxx: Fix losing FCP-2 targets during port perturbation tests
  Changes: Fix was to ignore delete for FCP-2 devices in certain sequence.

  - FCD-119: qla2xxx: Fix crash due to stale srb access around IO timeouts
  Changes: Ensure srb is either returned during error IO timeout error escalation.
  If that is not possible fail the escalation path.

  - FCD-1132: qla2xxx: HPE3PAR: Fix IOCB resource count leak
  Changes: Decrement FW IOCB resource count.

  - FCD-1132: qla2xxx: Turn off MQ for 8G adapter.
  Changes: For 8G adapter, multi queue was enabled accidentally.

  - FCD-1385: Wind down adapter after pcie error.
  Changes: Detect the PCIE error and returns all IO's to upper layers.

  - FCD-1412: qla2xxx: Reset Congestion Warning/Alarm signals count.
  Changes: Reset signals at every signal check boundary (1 sec).

  - 10.02.07.00.a13-k1 BH 02/17/2022
  - FCD-1353: qla2xx: a12/a11 driver compilation gives warning messages
  Changes: Fix the fall through warning
  - FCD-1342: qla2xxx: SL12SP5 a12 driver compilation issue observed
  Changes: fallthrough macro is defined based on gcc version.

  - 10.02.07.00.a12-k1 BH 02/09/2022
  - FCD-XXX: qla2xxx: Reset USCM stats/state and throttling on RSCN
  Changes: Reset USCM stats on getting an RSCN indicating a target port down.

  - FCD-XXX: qla2xxx: Increase max limit of ql2xnvme_queues
  Changes: Increase max limit of ql2xnvme_queues to (max_qpair-1)

  - FCD-478: qla2xxx: Fix missing devices on a LOGO from F-Port
  Changes: A call to logo all ports is made upon a F-Port LOGO.

  - FCD-XXX: qla2xxx: Move NVMe traffic to the slow queue on target congestion
  Changes: Steer the NVMe traffic to the slow Q on encountering target congestion

  - FCD-348: qla2xxx: edif: Fix slow session tear down.
  Changes: As a work around, driver would trigger a session tear down where
  it tell the local authentication application to also tear down.

  - FCD-XXX: qla2xxx: edif: Tweak debug log.
  Changes: Print AUTH ELS header to assist in debugging session's state of authentication app.

  - FCD-207: qla2xxx: Fix stuck session of prli reject
  Changes: Remove the stale code that cause the unintentional short cut.

  - FCD-1197: qla2xxx: Throttling up is seen when port is down
  Changes: Reset the stats/congestion state and the throttling algorithm on a link down event.

  - FCD-348: qla2xxx: Reduce false trigger to login
  Changes: Reduce the extra trigger to prevent multiple login to the same session.

  - FCD-207: qla2xxx: edif : Reduce N2N thrashing at app_start time
  Changes: make sure the old session is torn down before triggering a relogin.

  - FCD-207: qla2xxx: Fix laggy FC remote port session recovery
  Changes: allows the higher priority error recovery to run first before running
  the lower priority heart beat check.

  - FCD-XXX: qla2xxx: edif: Fix no logout on delete for n2n
  Changes: Set a flag to turn on implicit logout early in the session recovery
  to make sure it would go out in case of error.

  - FCD-348: qla2xxx: edif: fix session thrash 2
  Changes: prevents prli from going out before authentication app gives the ok

  - FCD-348: qla2xxx: edif: tear down session if keys has been removed
  Changes: If all keys for a session has been deleted then trigger a session tear down.

  - FCD-348: qla2xxx: edif: fix no login after app start
  Changes: Add a re-login trigger to relogin.

  - FCD-207: qla2xxx: Fix hang due to session stuck
  Changes: Break the requeue cycle and exit. The session deletion code will trigger a session relogin.

  - FCD-348: qla2xxx: edif: reduce disruption due to multiple app start
  Changes: Driver will skip over session tear down if app start is seen more than once.

  - FCD-348: qla2xxx: edif: send logo for unexpected ike msg
  Changes: Terminate/cleanup the AUTH ELS exchange.Follow with a pass through LOGO.

  - FCD-348: qla2xxx: edif: Fix IO timeout due to over subscription
  Changes: Track IOCB resources to prevent over subscription of IOCB resources

  - FCD-207: qla2xxx: edif: fix n2n login retry for secure device
  Changes: Add a few more login retries to revive the connection.

  - FCD-1205: qla2xxx: Fix disk failure to rediscover
  Changes: Set the online state before reporting to UL of the availability of the session.

  - FCD-207: qla2xxx: Fix n2n inconsistent plogi
  Changes: Delete the session to restart the connection, where ELS pass through
  PLOGI would be used consistently.

  - FCD-1267: qla2xxx: Fix crash during module load unload test
  Changes: Driver correctly freeing a pre-allocated structure for purex packet handling

  - FCD-XXX: qla2xxx: Fix missed DMA unmap for NVME ls requests.
  Changes: Add an unmap call during ELS completion.

  - FCD-1266: qla2xxx: Fix loss of NVME namespaces after driver reload test
  Changes: Calling the localport registration under a mutex

  - FCD-1212: qla2xxx: Host does not retry RDF when retries are exhausted and there is an incoming RDF
  Changes: Reset the SCM ELS counters to zero once an RDF is received.

  - FCD-XXX: qla2xxx: Restrict CPU-qpair mapping to work for NVMe only
  - FCD-XXX: qla2xxx: Change throttle up logic to be more aggressive.
  - FCD-XXX: qla2xxx: SCM: Add a bitmap for FPIN events.

  - 10.02.07.00.a11-k1 BH 01/17/2022
  - FCD-738: Fix T10 DIF performance on high end setup
  Changes: Added high performing CRC-1 interface

  - FCD-1182: qla2xxx: Fix initrd build error on RHEL 9
  Changes: Updated the build script specific to RHEL 9

  - FCD-XXX: qla2xxx: Fix incorrect latency counter display
  Changes: Fix this by ignoring I/Os with unusually high latencies.

  - FCD-207: qla2xxx: Fix n2n discovery issue with secure target
  Changes: On app_start, driver will reset the login retry attempt count.

  - FCD-1180: qla2xxx: Use correct feature type field during rffid processing
  Changes: Driver sends RFF_ID for initiator type 28 i.e. NVMe insteads of SCSI two times

  - FCD-1159: qla2xxx: Host doesn't retry the RDF/EDC when jammed with idle/CRC
  Changes: Wake up the DPC thread from the timer context when EDC/RDF needs to be

  - FCD-XXXX: qla2xxx: Build module with "-mindirect-branch=thunk-extern" option on RHEL 9

  - 10.02.07.00.a10-k1 BH 01/06/2022
  - FCD-XXX: qla2xxx: Support for changes in kernel 5.6 and above(rhel9.0)
  Changes: Changes made specific to rhel9.0

  - FCD-1136: qla2xxx: Throttling occurs even when USCM is disabled via CLI
  Changes: Update flags that control USCM features, correctly on ISP reset

  - FCD-1160: USCM continues to be active even if RDF response is jammed (and failed)
  Changes: USCM flags are updated properly when port toggle and RDF completion happen

  - 10.02.07.00.a9-k1 BH 01/03/2022
  - FCD-1154: qla2xxx: Fix incorrect reporting of task management failure
  Changes: Corrected endianness.

  - 10.02.07.00.a8-k1 BH 12/23/2021
  - FCD-814 : qla2xxx: Add a new v2 dport diagnostic feature.
  Changes: Buffer size is increased to 1024 bytes and handle START/RESTART
  command received from SDMAPI.

  - FCD-XXX: qla2xxx: Change throttle up logic to be more aggressive.
  Changes: Ramp up to faster initially, to get closer to the sweet spot quicker.
  Be less prone to operating at lower bandwidth in case of a sudden workload spike.
  Operate more conservatively (prioritize self over the network).

  - FCD-XXX: qla2xxx: Do not track SCM stats for all ports in the zone
  Changes: Track SCM stats just for the host and the target

  - FCD-XXX: qla2xxx: Stats for FPIN with event type "Lost Credit" not incremented.
  Changes: Add incrementing of "Lost Credit" stats.

  - FCD-684: qla2xxx: Fix link down when connected to AG fabric with FAA enabled
  Changes: Remove setting PUN and VL support bits in init control block.

  - FCD-1004: qla2xxx: Debug message improvement when changing SCM profile.
  Changes: Use profile names when changing profiles

  - FCD-868: qla2xxx: lockdown: "Unsupported Firmware" message
  Changes: checked different BITs for checking lockdown feature.

  - FCD-682: qla2xxx: tcm_qla2xxx driver load fails with "Invalid argument" error
  Changes: As tcm_qla2xxx is untested/unused, make it a dummy driver
  and reduce unncessary noise created by this.

  - FCD-886: qla2xxx: Hard Lockup on Unload/Load task with serial log enabled
  Changes: Hard lockup is seen because serial console driver crashed because of
  excessive logging. It was finalized to document this as known issues.

  - FCD-XXX: qla2xxx: Apply USCM profile change immediately

  - 10.02.07.00.a7-k1 BH 11/05/2021
  - FCD-926: qla2xxx: lockdown: lower debug severity messages
  - FCD-824: qla2xxx: lower debug severity message for fw lockdown
  Changes: This patch lower the severity of various log messages.

  - FCD-XXX: qla2xxx: Send LS_ACC for an incoming RDF
  Changes: Send the LS_ACC and the new RDF separately

  - FCD-721: qla2xxx: Set Max queue depth based on data direction.
  Changes: Max q depth for Initiator tracks Reads (per port) and Fcport tracks Writes (per fcport).

  - FCD-701: qla2xxx: Fix device reconnect in loop topology
  Changes: Fix by taking the main login path that acquires device handle.

  - FCD-XXX: qla2xxx: Add ql2xnvme_queues module parameter to configure number of NVME queues


  - 10.02.07.00.a6-k1 BH 10/08/2021
  - FCD-786: Shown wrong FDMI data for 64G adaptor
  Changes: qla2xxx: Corrected transmission speed mask values for FC

  - FCD-717: add retry for exe fw
  Changes: qla2xxx: Driver will retry Exec FW command up to 4 retries

  - FCD-XXX: qla2xxx: Compile out map queue changes if present in nvme-fc

  - 10.02.07.00.a5-k1 BH 10/01/2021
  - FCD-740: Fix scheduling while atomic
  Changes: qla2xxx: schedule the call to fc_remote_port_delete in non-interrupt context

  - FCD-691: Fix premature hw access after pci error
  Changes: qla2xxx: Check error condition still persist and/or wait until the OS to give the resume signal

  - FCD-756: Fix excessive messages during device logout
  Changes: qla2xxx: disable printing IO error messages by default

  - FCD-XXX: qla2xxx: abort fw dump if soft reset fail
  - FCD-XXX: qla2xxx: USCM: Retry USCM ELS for Logical busy error code
  - FCD-XXX: qla2xxx: USCM: USCM profile reset to Driver defaults
  - FCD-XXX: qla2xxx: Fix warning message due to adisc is being flush at /var/log/messages

  - 10.02.07.00.a4-k1 BH 09/20/2021
  - FCD-721: Revert code that keeps track of queue-depth directionally.
  Reason: Observing issue while q-depth accounting

  - FCD-XXX: Cleanup stale code.
  Changes: qla2xxx: Remove unused experimental code that uses
  explicit PRLO as a way to tear down session.

  - FCD-XXX: edif: remove old doorbell interface
  Changes: qla2xxx:driver has implemented a new doorbell mechanism via bsg.

  - FCD-348: edif: add retry for els pass through
  Changes: qla2xxx: edif: Add additional retries to reduce higher level recovery.

  - FCD-XXX: edif: Synchronize NPIV deletion with authentication application
  Changes: qla2xxx: Notify authentication application of a NPIV deletion event is about to occur.

  - FCD-XXX: edif: Fix potential stuck session in sa update
  Changes: qla2xxx: Set flag properly for any attempt to relogin.

  - FCD-704: The external flag for tcm_qla2xxx was not set.
  qla2xxx: Add tcm_qla2xxx to externally supported module list.

  - 10.02.07.00.a3-k1 BH 09/08/2021
  - FCD-XXX: qla2xxx: edif: wait for app to ack on sess down
  Changes: On session deletion, wait for app to acknowledge before moving on.

  - FCD-XXX: qla2xxx: edif: fix edif bsg
  Changes: Properly fill out the reply_payload_rcv_len field.

  - FCD-XXX: qla2xxx: edif: fix inconsistent check of db_flags
  Changes: Replace value check with bit flag check.

  - FCD-XXX: qla2xxx: edif: increase ELS payload
  Changes: Adjust memory buffer size to be able to handle max ELS payload.

  - FCD-343: qla2xxx: turn off target reset during issue_lip
  Changes: driver sends additional target reset to remote device before resetting the link.

  - FCD-XXX: qla2xxx: edif: Reduce Initiator-Initiator thrashing.
  Changes: Reduce unnecessary stress for authentication application to deal with unused connections.

  - FCD-XXX: qla2xxx: fix gnl list corruption
  Changes: move lock deletion behind lock.

  - FCD-XXX: qla2xxx: edif: flush stale events and msgs on session down
  Changes: Prevents authentication application from having to process stale data.

  - FCD-XXX: qla2xxx: edif: reduces thrashing of the connection.
  - FCD-XXX: qla2xxx: edif: tweak trace message
  - FCD-XXX: qla2xxx: edif: fix app start delay
  - FCD-XXX: qla2xxx: USCM: Handle SCM ELS from switch
  - FCD-XXX: qla2xxx: edif: fix app start fail

  - 10.02.07.00.a2-k1 BH 09/02/2021
  - FCD-156: qla2xxx: 3PAR: Fix out of bound mem access
  Changes: Add additional check to make sure the range of memory

  - FCD-624: qla2xxx: Source driver gives compilation error on RHEL8.5
  Changes: Offending code on tcm_qla2xxx module has been removed

  - FCD-xxx: qla2xxx: Fix use after free
  Changes: Would check for command is aborted / completed by FW before exiting the call.

  - ER148553: qla2xxx: relogin during fabric disturbance
  Changes : Set the scan_need flag to indicate a session

  - FCD-464: qla2xxx: Fix race between timeout handler and completion handler
  Changes: One reference is taken for the normal code path and one for the timeout path

  - FCD-453: Fix FC-NVME register localport failure.
  Changes: Module initialization is added to nvme_fc_port_template

  - FCD-XXX: qla2xxx: Process responses in Tx path if any available for better performance
  Changes: Call process_response_queue() in Tx path

  - FCD-492: Kernel crashes when accessing port_speed sysfs file
  Changes: CNA: Fix this by changing the lookup.

  - FCD-XXX: qla2xxx: Refactor asynchronous command initialization
  - FCD-XXX: qla2xxx: USCM - Add profile support for throttling IO
  - FCD-XXX: qla2xxx: Move heart beat handling from dpc thread to workqueue
  - FCD-XXX: USCM: Enhancement to throttle only read traffic during host congestion
  and write traffic during target congestion.

  - 10.02.07.00.a1-k1 BH 08/22/2021

  - FCD-124: qla2xxx: edif: Use link event to wake up app
  Changes: The link up event would notify app of the present of a new SCSI Host.

  - FCD-299: qla2xxx: Fix crash in NVME abort path
  Changes: Fixed the issue by removing stale access.

  - FCD-XXX: qla2xxx: Display 16G only as supported speeds for 3830c card.
  Changes: This card doesn't support lower speeds, hence,
  update the fdmi and sysfs fields to display 16G only.

  - FCD-226: qla2xxx: Update details for building kdump initrd in NVMe BFS.
  Changes: Currently inbox driver doesn't support kdump/kexec kernel,
  hence user need to update kdump initrd to have OOB driver part of it.

  - FCD-372: qla2xxx: Anomaly in the congestion stats
  Changes: Clear the signal counter on a qaucli clear

  - FCD-279: Request QCC to check/report adapter's MCTP state
  Changes: qla2xxx: Add support for mailbox passthru

  - FCD-XXX: Perf improvement: Pick qpair such that Tx and Rx are processed on same CPU.
  Changes: qla2xxx: Select qpair depending on which CPU post_cmd() gets called

  - FCD-XXX: scsi: qla2xxx: Reserve extra IRQ vectors

  - 10.02.06.02-k1 BH 08/11/2021
  - FCD-511: Path does not go into "Marginal" state on receiving FPIN-LI
  Change: qla2xxx: Pass the LI events to the scsi_transport_fc

  - 10.02.06.01-k1 BH 07/27/2021
  - ERXXXXXX: qla2xxx: Check for firmware capability before creating QPair.
  Change: Move the check for FW attributes to right location. This check
  is specific for ISP25XX.

  - 10.02.06.00-k1 BH 07/21/2021
  - ERXXXXXX: qla2xxx: Version number is changed from 10.02.06.00.a1-k1
  to 10.02.06.00-k1

  - 10.02.06.00.a1-k1 BH 06/29/2021
  - FCD-297: Fix NVME session down detection
  Change: qla2xxx: Session tear down and allow relogin to re-drive
  the connection under condition

  - ER148553/FCD-156: Fix NVME retry
  Change: qla2xxx: Alternate back and forth on every PRLI failure
  until login retry count has depleted or it is succeeded.

  - FCD-316: System crash when number of CPUs forced to 2
  - Change: qla2xxx: Sync queue idx with queue_pair_map idx.
  This fix needs both commits released on 10.02.05.00-k
  and 10.02.06.00.a1-k against FCD-316

  - ERXXXXXX: qla2xxx: Readme: Update OS details that supports NVMe BFS.
  - ERXXXXXX: qla2xxx: Readme: Remove workaround of forcing of INTa
  mode for kdump kernel.

  - ERXXXXXX: qla2xxx: Readme: Update OS details that supports NVMe BFS.


  - FCD-316: System crash when number of CPUs forced to 2
  Changes : qla2xxx: prevents unbalanced QP allocation where nr_hw_queues
  is two less than the number of CPUs.
  This fix needs both commits released on 10.02.05.00-k
  and 10.02.06.00.a1-k against FCD-316

  - FCD-268: Multiple USCM ELS are sent
  - FCD-280: Fix issues reported by running a few Jammer tests
  Changes: qla2xxx: Retry the USCM ELS 3 times when there are failures.

  - FCD-172: build.sh: Fix udev script installation error

  - ER148402: Install restrictions when binary rpm is already installed.
  Changes: qla2xxx: Updated README file for documentation

  - ERXXXXXX: qla2xxx: Support kdump kernel for NVMe BFS.
  - ERXXXXXX: qla2xxx: Update README file for building kdump initrd in NVMe BFS.

  - ER148402: Disallow install if qla2xxx rpm is installed.
  Changes: qla2xxx: Prevent install from source if rpm is installed.

  - FCD-230: Add additional debug logs
  Changes: qla2xxx: Add additional logs to differentiate between
  FW driver and driver driven ELS

  -FCD-XXXX: Changes to support kdump kernel.
  Changes: qla2xxx: Don't allocate fw dump for kexec kernel and
  Allocate single Q for kexec kernel.

  - FCD-227: Linux Driver order of RDF to follow EDC ELS

  - FCD-225 - Qaucli fails to list scm stats for Qlipper

  - FCD-172: fix udev rule
  Changes: qla2xxx: permission of the rule file set to 644
  - ER148529: NVMe initiator connected to brocade fabric are down
  Changes: qla2xxx: Fix hang on NVME command timeouts.

  - ER148531: SN1600Q/SN1610Q, Gen10PlusSnap4 - Async-login failed errors on BFS boot-up-QXCR1001796980
  Changes: qla2xxx: Suppress unnecessary log messages during login

  - ER148578: Observed that initiator is sending prli type 0x8 for for nvme ports
  Changes: qla2xxx: fix NVME | FCP personality change.

  - ER148141: Driver vmkmgt: Don't differentiate Signals and FPIN's for the Congestion counters when they detected.
  Changes: qla2xxx: Split congestion warnings and alarms based on signals and FPINs

  - ERXXXXXX: Add support for marginal path.
  Changes: qla2xxx: Added support for eh_should_retry_cmd callback in qla2xxx host template.

  - ERXXXXXX: scsi: qla2xxx: Flush all sessions on zone disable
  - ERXXXXXX: scsi: qla2xxx: Fix memory size truncation
  - ERXXXXXX: scsi: qla2xxx: Fix a NULL pointer dereference in an error path
  - ERXXXXXX: qla2xxx: fix sparse warning.
  - ERXXXXXX: qla2xxx: edif: do secure plogi when auth app is present
  - ERXXXXXX: qla2xxx: Add license.
  - ERXXXXXX: qla2xxx: USCM - Do not send EDC/RDF ELS when firmware has already sent it
  - ERXXXXXX: qla2xxx: Inclusion words are applied on release note and readme file
  - ERXXXXXX: qla2xxx: edif: add N2N support for EDIF
  - ERXXXXXX: qla2xxx: Updated drelease.notes header
  - ERXXXXXX: qla2xxx: Fix hang during NVME session tear down.
  - ERXXXXXX: qla2xxx: USCM: Cleaned up a few debug messages
  - ERXXXXXX: qla2xxx: edif: fix edif enable flag

  - ER148546: USCM: QCC Cong Mgmt not available on port with FW:v9.07.00 and DVR:v10.02.05.00.a6-k
  Changes: qla2xxx: setting the flags to indicate to the application that the RDF is complete and
  SCM is supported.

  - ERXXXXXX: Add heartbeat check
  Changes: qla2xxx: Use 'no-op' mailbox command to check to see if FW is still responsive.

  - ERXXXXXX: DEBUG: simulate FW hang.
  Changes: qla2xxx: Driver will detect the hang and recover via hearbeat check.

  - ERXXXXXX: qla2xxx: Check for FW attributes before enabling MQ.
  - ERXXXXXX: qla2xxx: USCM Handle ELS errors from switch by retrying 3 times
  - ERXXXXXX: scsi: qla2xxx: Correct the supported speeds for 16G Mezz card.


  - ER148472: With NPIV ports, link bounce causes loss of strongSwan session at the target.
  Changes: qla2xxx: : fix npiv create errorneous error
  qla2xxx: EDIF: reject AUTH ELS on session down.
  qla2xxx: edif: Fix stale session

  - ER148478: System Crash while NPIV RAW IO ON VPORT LUNS on SLES15 SP3 + QLE 2692 + R7525
  Changes: qla2xxx: fix unsafe removal from link list.

  - ERXXXXXX: qla2xxx: USCM - Send EDC and RDF ELS from the driver

  - ER147707: Device recovery not happening and OS hungs on qla2xxx
  Changes: qla2xxx: v2: fix crash in PCIe error handling
  - ER148123: Issue with Max secure connection with override_lower_limits
  Changes: qla2xxx: v2: fix stuck session
  - ER148402: SLES, Driver Install location is inconsistent.
  Changes: qla2xxx: Fix driver install location for SLES

  - ER148123: Issue with Max secure connection with override_lower_limits
  set and rekey/reauth with240/480-luns disconnected after 2 hr traffi
  Changes: qla2xxx: edif: doorbell tweak

  - ER148448: Issue w.r.t qaucli, where Remote type "Unknown" for eDIF env.
  for qaucli2.4.0.build 20
  Changes: qla2xxx: fix port type info

  - ER148433: The log does not show a valid data rate while the link speed is 64G.
  Changes: qla2xxx: fix debug print of 64G link speed.

  - ER147650: 'show fdmi? command does not list ? OS Name and Version?
  parameter for SLES12SP4-QXCR1001771822
  Changes: qla2xxx: Show OS name and version in FDMI-1
  - ER147707: Device recovery not happening and OS hungs on qla2xxx
  Changes: qla2xxx: fix mailbox recovery during PCIE error
  qla2xxx: v2: fix crash in PCIe error handling
  - ERXXXXXX: qla2xxx: Changes to support FCP2 Target.
  - ERXXXXXX: qla2xxx: include AER debug mask to default
  - ERXXXXXX: qla2xxx: fixes for compilation on RH8.4
  - ERXXXXXX: qla2xxx: Do logout even if fabric scan retries got exhausted.

  - 10.02.05.00.a1-k1 BH 02/27/2021
  - EDIF Changes:
  - ER148247: issue with nvme-npiv env, once we delete npivs, after a while,
  it is reducing strongswan connections.
  Change: free sa index during npiv delete

  - ER148123: Issue with Max secure connection with override_lower_limits set
  and rekey/reauth with240/480-luns disconnected after 2 hr traffi
  Change: adjust online|offline notification to app and
  tweak LOGO on session down.
  - ERXXXXXX: qla2xxx: edif: tweak log message
  - ERXXXXXX: qla2xxx: edif: Redundant code (already set in qla_edb_node_alloc)

  - ER147707: qla2xxx: Device recovery not happening and OS hungs on qla2xxx
  Change: Fix RISC RESET completion polling.

  - ER148111: qla2xxx: FCPowerKit reflects huge delays in CMDlets execution.
  Change: Check lockdown functionality before requesting lockdown feature.

  - ER148277: USCM: Linux Peer showing misleading 'Congested, throttling down,
  permitted: 1', prior to 'Reached low watermark, permitted: 2':
  - Change: Fix misleading debug message

  - ERXXXXXX: adjust request/respond queue size for 28xx
  - ERXXXXXX: qla2xxx: Change %p to %px in the log messages.

  - 10.02.01.00.a15-k1 BH 11/12/2020
  ERXXXXXX: qla2xxx: Updated README file for new module parameters

  - 10.02.01.00.a14-k1 BH 11/06/2020

  - ER146725: eDIF another driver panic running script: ./test_target_no_unload.sh
  Change: qla2xxx: Fix crash in qla_nvme_abort_set_option.

  - ER147771: Call Trace while shutting down the adapter ports (LINK DOWN).
  Change: qla2xxx: Handle aborts correctly for port undergoing deletion.

  - ERXXXXXX: qla2xxx: Add scsi_change_queue_depth to slave configure.

  - 10.02.01.00.a13-k1 BH 10/28/2020

  - ER147600: Cisco: rpd ELS cmd fail to fetch the speed capabilities
  Change: qla2xxx: Used correct rdp spec, which was broken during code clean-up.

  - ER147695: FC-NVMe target discovery fails when initator wwpn < target wwpn in an N2N (Direct Attach) config
  Change: qla2xxx: fix N2N + NVME connect retry fail

  - ER147832: Issue with uSCM Linux with QCC CLI for some configuration
  Change: qla2xxx: Show event severity only when device state is congested.

  - ER147824 : scmr_stat sysfs node runs out of memory
  Change: qla2xxx: Come up with a compact version of scmr_stat

  - ER147823: NVMe IO is not getting throttled up or down.
  Change: qla2xxx: Enable throttle control for NVMe targets for Peer Congestion.

  - ERXXXXXX: qla2xxx: Count tgt short term link if link comes back before dev_loss_tmo.
  - ERXXXXXX: qla2xxx: Correct the check for fcport while displaying target counters.
  - ERXXXXXX: qla2xxx: Change trigger for host short term link down to dev loss tmo.
  - ERXXXXXX: qla2xxx: Move an SCM log under a debug level.
  - ERXXXXXX: qla2xxx: Set vendor_rsp[0] value.
  - ERXXXXXX: qla2xxx: Make throttling messages more informative.

  - 10.02.01.00.a12-k1 SK 10/15/2020
  - ER147625: NVMe IO's are failing with Read/Write after LIP reset.
  Change: qla2xxx:Return EBUSY until the remote port delete finishes.

  - ER147653: Target side strongswan start/stop, make initiator crashed.
  Change: qla2xxx: edif: v2 fix double bsg done.

  - ER147791: USCM: clear option is not clearing hba alarm/warning, or clear cong or nvme target stats.
  Change: qla2xxx: Clear Sev and NVMe Target Stats.

  - ER147793: USCM: Throttling has wrong throttling up info and event period is not honored.
  Change: qla2xxx: Fix Throttling algorithm regression.

  - ER147759: NVMe Admin commands are getting throttled and causing admin queue failures.
  Change: qla2xxx: Throttle NVMe I/O commands only.

  - ERXXXXXX: qla2xxx: edif: fix aes_gmac mode.
  - ERXXXXXX: qla2xxx: edif: v2: standardize on port_id_t for bsg api.
  - ERXXXXXX: qla2xxx: edif: fix 4byte align.
  - ERXXXXXX: qla2xxx: edif: fix ELS meta data.
  - ERXXXXXX: qla2xxx: Clear Congestion State/Throttling during chip Reset.
  - ERXXXXXX: qla2xxx: Clear SCM Severity as part of SCM Stats Clear.

  - 10.02.00.02.a11-k1 BH 10/09/2020
  - ER147734 : Lip reset on the isolated port causes server crash
  Change: qla2xxx: Don't allow FW, MPI and lip reset on isolated port.

  - ER147479 - PPC BE RH7.6 - qla2xxx driver loading - machine crashed.
  Change: qla2xxx: Fixes for big endian machines

  - ER147646: Call Trace observed while validating a MPI Pause test scenario.
  Change: qla2xxx: Correct the WARN_ON check in qla_nvme_abort_set_option.

  - ER147615: Throttling does not work with low I/Os.
  Change: qla2xxx: Check and round off fractional I/Os to 1 on ISP 27xx/28xx Series Adapters

  - ERXXXXXX: qla2xxx: List NVMe targets under scmr_stats on ISP 27xx/28xx Series Adapters
  - ERXXXXXX: qla2xxx: Don't check for port isolation during abort isp.
  - ERXXXXXX: qla2xxx: SCM: Turn off SCM port parameter update mailbox command.
  - ERXXXXXX: qla2xxx: Fix I/O failures during remote port toggle testing

  - 10.02.00.02.a10-k1 BH 09/25/2020
  SCM Changes:
  - ERXXXXXX:
  Changes - qla2xxx: Clear Congestion state when an RSCN is received/target is torn down.
  qla2xxx: throttling algorithm improvement.
  qla2xxx: Add throttling support for NVMe targets.

  EDIF Changes:
  - ERXXXXX: LUN loss on ipsec stop/start on target side.
  Change: save Nport on receive of PLOGI
  - ERXXXXX: fix ELS receive collision between physical and NPIV hosts.
  Change: remove erroneous source Nport ID search.

  - ER147570: FCP Performance Drop in latest driver for smaller IOs size.
  Change: qla2xxx: Change WQ_UNBOUND to WQ_MEM_RECLAIM. WQ_MEM_RECLAIM : wq is guaranteed to have at least one execution context regardless of memory pressure.

  - ER147632: QLE2774: RHEL 8.2 System crashes while upgrading he FW from 9.6.0 to 9.6.1 with QCC CLI build 12
  Change: qla2xxx: Fix system crash on nvme abort path by checking sp of aborting command before accessing it.

  - ER147418: server crash seen when trying to capture the debugfs stat on isolated port.
  - ER147645: System panic while trying to capture debugfs stats for EED.
  Change: qla2xxx: Check rport before accessing target number.

  - ER147632: Fix potential stale mem access
  Change: remove stale sp pointer reference

  - CQXXXXXX: FPIN events are not readily decodable.
  Change: qla2xxx: Make FPIN events prints human readable.

  - ER146879: Add support to clear SCM Stats
  Change: qla2xxx: Added support to clear SCM/SCMR Stats on ISP 27xx/28xx Series Adapters

  - ERXXXXXX: qla2xxx: Allow get host stat during reset and sync reset.
  - ERXXXXXX: qla2xxx: Set reset_cmd_err_cnt on reset failure only.
  - ERXXXXXX: qla2xxx: Add isolated flag and return EPERM on isolation.
  - ERXXXXXX: qla2xxx: Count short term link if link comes back in 10 sec.
  - ERXXXXXX: qla2xxx: Don't check for fw_started while posting nvme command.
  - ERXXXXXX: qla2xxx: Pass irq_offset to blk_mq_pci_map_queues API.
  - ERXXXXXX: qla2xxx: lockdown: fix stale sp access.
  - BZ1868688: qla2xxx: tear down session if FW say its down.

  - 10.02.00.02.a9-k1 BH 09/03/2020
  - ER147554 - sg_reset appears hung iterating over too many Qpairs.
  Change - qla2xxx: limit interrupt vectors to number of cpu.

  - ERXXXXX - qla2xxx: klocwork: Fix Bit field 'mpi_-' has one bit and is signed.

  - ERXXXXX - qla2xxx: Change post del message from debug level to log level.

  - ERXXXXX - qla2xxx: lockdown: fixup - Change error response as per API test.

  - ERXXXXX - qla2xxx: Fix map_queue interface to use the correct blk-mq call.

  - ERXXXXX - Added Structural changes for SCM Phase 2 support.
  Change : qla2xxx: Update structure definitions for SCM to support backward compatibility.

  - 10.02.00.02.a8-k1 BH 08/30/2020
  - ERXXXXXX - Fix point-to-point (N2N) device discovery issue.
  Change - qla2xxx: Fix point-to-point (N2N) device discovery issue.

  - ERXXXXXX - To wait for ABTS response on I/O timeouts for NVMe.
  Change - qla2xxx: To wait for ABTS response on I/O timeouts for NVMe.

  - ER147523 - BSG stack trace and SCM display issues.
  Change - SCM: Functional regression with a6 release.

  - ER 147413 - edif: Fix issue with DIF enable target discovery.
  Change - qla2xxx: edif: Fix issue with DIF enable target discovery.

  - ER147480 clear ASYNC_ACTIVE flag to allow relogin.
  Change - qla2xxx: fix stuck session.

  - ERXXXXXX - lockdown: add mpi flash lock down support
  Change - qla2xxx: lockdown: add mpi flash lock down support

  - 10.02.00.02.a7-k1 BH 08/22/2020
  - ER147495 - edif changes
  Change - qla2xxx: edif: fix nvme discovery failure
  qla2xxx: edif: fix els corruption.

  - ER147478 - SLES 15sp1 10.02...a6-k compile warning
  Change - qla2xxx: Compilation changes for sles15sp1

  - ERXXXXXX - add mpi flash lock down support
  Change - qla2xxx: lockdown: add mpi flash lock down support
  qla2xxx: lockdown: fix compile problem. do not submit

  - ERXXXXXX: SCMR changes
  Change - qla2xxx: SCMR: Correct scmr_outstanding_reqs accounting.
  qla2xxx: SCM: Changes to separate current_events and current_state.
  qla2xxx: SCMR: Increase local array size.

  - ER147298 : USCM "Congestion Warning" counter regression
  Change - qla2xxx: Correct FPIN Structure Definition (Severity).

  - 10.02.00.02.a6-k1 BH 08/13/2020
  - ERXXXXXX - fix crash on session cleanup + unload.
  Change - qla2xxx: fix crash on session cleanup + unload.

  - ER147329 - edif changes
  Change - qla2xxx: edif: fix compile error. do not submit
  qla2xxx: edif: fix double free on ELS send failure.
  qla2xxx: edif: reject els if non secure device.
  qla2xxx: edif: reject ELS on session down.
  qla2xxx: edif: redefine purex dest addr to be more consistent.
  qla2xxx: edif: tweak debug messages.
  qla2xxx: edif: fix nvme+edif target connect problem.

  - ER147460 - issue with Diag test on QCC CLI 2.4.0 build 10 with 10.2.00.2-a5 driver
  Change - qla2xxx: edif: move bsg auth els into separate routine.
  qla2xxx: edif: Fix error in BSG ELS path that has valid response data.

  - ER147312 - Add support to report MPI FW state.
  Change - qla2xxx: Add support to report MPI FW state.
  qla2xxx: Fix reset of MPI firmware.
  qla2xxx: Fix MPI reset needed message.

  - ER147437 - With a5 driver observed warning messages.
  Change - qla2xxx: Compilation changes for Citrix, rhel and sles.

  - 10.02.00.02.a5-k1 BH 07/31/2020
  - ER147418: server crash seen when trying to capture the debugfs stat on isolated port.
  Change - qla2xxx: Don't process target debugfs stats if port is isolated.

  - ERXXXXXX : Add SCM stats to scmr_stats node.
  Change - qla2xxx: Add SCM stats to scmr_stats node.

  - ER147419 : Fix crash due to request q pointer extraction failure.
  Change - qla2xxx: Latency measurement patch.

  - ERXXXXXX : edif: remove redundant field in port_id_t
  Change -qla2xxx: edif: remove redundant field in port_id_t

  - ER147331 - extract bbc from PLOGI template payload.
  Change -qla2xxx: Fix buffer-buffer credit extraction error

  - ERXXXXXX : Split qla2x00_configure_local_loop()
  Change scsi: qla2xxx: Split qla2x00_configure_local_loop()

  - ERXXXXXX : SCMR - Add I/O flow control.
  Change - qla2xxx: SCMR - Add I/O flow control.

  - 10.02.00.02.a4-k1 BH 07/23/2020
  - ER147402 - Do not install nvme auto connect script if OS is installing it.
  Change - qla2xxx: auto-connect scripts are install based on nvme-cli package.

  - ERXXXXXX - Fixed return status of nvme fcp request.
  Change - qla2xxx: Set NVME status code for failed NVME FCP request.

  - ERXXXXXX - Multi-que support for TMF.
  Change - qla2xxx: Multi-que support for TMF.

  - ERXXXXXX ? edif changes
  Change - qla2xxx: edif: simplify reserve/release of sa_index.
  qla2xxx: edif: tweak debug log.
  qla2xxx: edif: adjust ELS resp length.
  qla2xxx: edif: send logo on app stop.
  qla2xxx: edif: remove prlo in session deletion.
  qla2xxx: edif: Fix app stop stall.

  - ER147298 - USCM "Congestion Warning" counter regression w/.65 driver.
  Change - qla2xxx: Correct fpin_descriptor definition.
  qla2xxx: Consolidate EDIF & SCM Purex Calls.

  - ERXXXXXX - Calculate avg. time taken by different components for IO completion.
  Change - qla2xxx: Latency measurement patch.

  - 10.02.00.02.a3-k1 BH 07/16/2020
  - ER147348 - Observing firmware dump while running qaucli -g post port isolation.
  Change - qla2xxx: Don't check firmware state in case of chip is down.

  - ER147338 - SLES: Driver load failed - modprobe: ERROR: module 'qla2xxx' is unsupported.
  Change - qla2xxx: Add support for loading external modules on SuSE.

  - ER147361 - System panic after enabling port isolated during TimeOutReset.
  Change - qla2xxx: Synchronize the update the host counters using lock.

  - ER147370 - Hardware Error counter not incrementing for MBX command timeout.
  Change - qla2xxx: Update hardware error count for various error conditions.

  - ERXXXXXX - The change is to help in debuggging.
  Change - qla2xxx: Move some messages from debug to normal log level.

  - ER147346 - Observed a call trace after port isolation.
  Change - qla2xxx: Fix the call trace for flush workqueue.

  - ERXXXXXX - For debug purpose.
  Change - qla2xxx: Add error counters to debugfs node.

  - 10.02.00.02.a2-k1 AE 07/10/2020
  - ERXXXXXX - qla2xxx: Fix TCM compilation issues.
  Change - Enabled build of tcm_qla2xxx module and fixed compile issues.

  - ERXXXXXX - qla2xxx: edif : Added back the app_stop wait and avoid if link is down.
  Change - Added wait during app stop.

  - ERXXXXXX - qla2xxx: Set BIT_13 for NVMe Async events.
  Change - Driver changes to skip SLER for Async event command.

  - ER147323 - qla2xxx: Correct the check for sscanf return value.
  Change - Driver updated to check version correctly.

  - ERXXXXXX - qla2xxx: v2: Add EDIF support.
  Change - Refactoring EDIF code for modularity.

  - ER147298 - Congestion Warning/Alarm counters fail to increment
  Change - Update driver to increment the counters for congestion signals.

  - 10.02.00.02.a1-k1 AE 06/29/2020
  - qla2xxx: Enable IOCB throttling by default.
  - qla2xxx: Implementation to get and manage host, target stats and initiator port.
  - qla2xxx: Add SLER and PI control support.
  - qla2xxx: Do not log message when reading port speed via sysfs
  - qla2xxx: fix null pointer access.
  - qla2xxx: Use MPI hang trigger to do PEGTUNE halt.
  - qla2xxx: Reduce erroneous error in link reset path
  - qla2xxx: v2: fix stalled N2N reconnect.
  - qla2xxx: Fix warnings on SLES12SP5.
  - qla2xxx: Fix compilation issues on SLES15
  - qla2xxx: Compilation Fixes for SLES15SP1.
  - qla2xxx: Debugfs compilation issue fix for RH7.6.
  - qla2xxx: Fix gcc test compile error output being printed.
  - qla2xxx: Timestamp device online and offline transitions.
  - qla2xxx: Add rport fields in debugfs.
  - qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devices.
  - qla2xxx: Setup debugfs entries for remote ports.
  - qla2xxx: Fix edif related compilation issue on RH7.6.
  - Fixes for compilation on hpe branch
  - qla2xxx: Compilation fixes for RH8.2
  - qla2xxx: Compilation changes for RH7.6
  - qla2xxx: Fixes for compilation on RH7.x I
  - qla2xxx: bsg_job to bsg_job_t
  - qla2xxx: I Unify source code to work with newer kernels.
  - qla2xxx: Makefile changes from code-uni-devel-10x.
  - qla2xxx: qla_edif file changes to compile the driver.
  - qla2xxx: Fix compilation issues.
  - qla2xxx: Fix Makefile issue.
  - qla2xxx: fix compile error
  - qla2xxx: Use explicit LOGO in target mode
  - qla2xxx: Add EDIF support.
  - qla2xxx: Addd edif related files.
  - qla2xxx: Fix MPI failure AEN (8200) handling.
  - qla2xxx: SCM - Backport optimizations and style changes from upstream work.
  - qla2xxx: Fix warning in qla_attr.c file.
  - qla2xxx: Fix nvme compilation error.
  - qla2xxx: Fix crash in alloc w/GFP_KERNEL + interrupt
  - Author : Quinn Tran <qutran@marvell.com> qla2xxx: v2: add iocb resource tracking.
  - qla2xxx: Fix WARN_ON in qla_nvme_register_hba.
  - qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime.
  - qla2xxx: Make tgt_port_database available in initiator mode.
  - qla2xxx: reduce noisy debug message.
  - qla2xxx: Fix mailbox Ch erroneous error
  - qla2xxx: fix login timeout.
  - qla2xxx: Accomodate for SCM FW attribute bit change.
  - qla2xxx: post FC event (FPIN) to transport FPIN handler.
  - qla2xxx: Hide fc_host_fpin_rcv kernel dependency.
  - qla2xxx: Add changes to compile across various kernels.
  - qla2xxx: Use active targets to update SCM stats.
  - qla2xxx: Move SCM functions to qla_isr to keep changes local.
  - qla2xxx: Code to process FLOGI ACC extended payload.
  - qedf: Fix compilation issue - revisit.
  - qla2xxx: SCM Phase 1 Implementation + 2 other patches.
  - qla2xxx: Enable PUREX passthru post ISP reset.
  - qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV.
  - qla2xxx: performance tweak
  - scsi: qla2xxx: fix fcport null pointer access.
  - fixup! qla2xxx: Fix unbound NVME response length.
  - scsi: qla2xxx: Fix unbound NVME response length
  - qla2xxx: Add host attribute to trigger MPI hang.
  - qla2xxx: ONEOFF: silent dbg messages for good path io.
  - qla2xxx: ONEOFF: fix pDIF detection
  - qla2xxx: Snoop inquiry response atleast 168 bytes to determine proprietary DIF.
  - qla2xxx: ONEOFF: add debug counters for T10-PI/DIF
  - qla2xxx: ONEOFF: add MQ support for HP3PAR propritary T10-PI
  - qla2xxx: HPE 3PAR private T10-PI support.
  - qla2xxx: Check for fabric_priority flag during login
  - qla2xxx: use iocb_fabric_priority flag
  - qla2xxx: Fix QoS name and add debug logs
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: HPE: Register FDMI QOS
  - qla2xxx: Add bsg interface for qos lun level bitmask.
  - qla2xxx: Read E2E QoS fcport priority bitmasks from flash.
  - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field.
  - qla2xxx: Add fabric priority qos lun iocb mechanism.
  - qla2xxx: Implement CT command GFO (Get Fabric Object).
  - qla2xxx: Add support for fabric priority per target.
  - qla2xxx: fix mtcp dump collection failure.
  - qla2xxx: Set Nport ID for N2N
  - qla2xxx: Fix crash during device discovery.
  - qla2xxx: Handle NVME status iocb correctly.
  - qla2xxx: Remove restriction of FC T10-PI and NVME
  - qla2xxx: serialize fc_port alloc in N2N
  - qla2xxx: NPIV does not come up after FW dump.
  - qla2xxx: fix RDP respond data format bug.
  - qla2xxx: force semaphore on flash validation failure.
  - qla2xxx: add more FW debug information
  - qla2xxx: Revert: Disable T10-DIF feature with FC-NVMe during probe
  - qla2xxx: Update BPM enablement semantics.
  - qla2xxx: fix FW resource print error.
  - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs.
  - qla2xxx: Ensure flash updates return possible failure status through bsg interface.
  - qla2xxx: Improved secure flash support messages
  - qla2xxx: fix flag passing error
  - qla2xxx: Use FC generic update firmware options routine for ISP27xx.
  - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options.
  - qla2xxX: Add 16.0GT for PCI String
  - qla2xxx: Use FW_STARTED macro
  - qla2xxx: Add fixes for mailbox command
  - qla2xxx: Fix login IOCB flag
  - qla2xxx: Save rscn_gen for new fcport
  - qla2xxx: firmware option 3 is clobbered by speed set
  - qla2xxx: ISP28xx active FW region
  - qla2xxx: Add portname to print logs in qla24xx_logio_entry().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add Speed in SFP print information
  - qla2xxx: Fix RDP response size
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Add vendor extended FDMI additions and amendments.
  - qla2xxx: Provide separate RDP enable.
  - qla2xxx: Add vendor extended RDP additions and amendments.
  - qla2xxx: Add changes in preparation for vendor extended FDMI/RDP.
  - qla2xxx: Add 2061 PCI ID
  - qla2xxx: Remove all DIX-0 references
  - qla2xxx: Add endianizer macro calls to fc host stats.
  - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data.
  - qla2xxx: Move free of fcport out of interrupt context.
  - qla2xxx: Add beacon LED config sysfs interface.
  - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect

  - 10.01.00.22-k AE 06/29/2020
  - Upstream driver as part of Linux 5.6


